How to connect the wireless data transmission module SV6500 to the PC

Wireless data transmission radio is a very commonly used wireless data transmission module. When using it, we need to set the parameters of it. Then we need to connect the wireless data transmission module to the computer at this time. Let’s share with you the wireless data transmission radio and computer. Method of connection.

Connection diagram of wireless data transmission station SV6500 and computer

Method of connecting wireless data transmission station to computer

1. Connect the small suction cup antenna to the ANT pin of the wireless data transmission station;
2. Connect the digital transmission radio station and the level adapter board of the corresponding interface through the dedicated 6PIN terminal line;
3. Insert the USB head of the level adapter board into the USB port of the computer to connect to the PC.
4. Connect the wireless data transmission station to the DC 12V power supply;
5. At this time, you can see that the two-color light is always on, indicating that it has switched to the configuration mode.

Through the example diagram and the connection method mentioned above, I believe you will understand at a glance that if you connect the wireless data transmission station to the computer, more practical ways to use the wireless module are on the official website of NiceRF Wireless. Welcome everyone to check it out.