2.4GHz Small Size Embedded Beacon RF Module BLE Protocol Beacon128

beacon module Beacon128
beacon module Beacon128
beacon module Beacon128
beacon module Beacon128
beacon module Beacon128
beacon module Beacon128
beacon module Beacon128
beacon module Beacon128
beacon module Beacon128
beacon module Beacon128
  • Beacon128 is a low-voltage, low-power, fully-integrated, Bluetooth 1 Low Energy (BLE) RF Module, It features a low-power physical layer, a link layer with an embedded security engine, a Host/Controller Interface (HCI), and a powerful power management which allows operation using efficiently 3V batteries.
  • 1. Beacon module adopts Ble protocol, which can communicate with BLE module and smart mobile phone,
  • 2. Farther than BLE distance,
  • 3. Broadcast communication can be peer to pear, many-to-many, and there is no limit on the number.
  • 4. SPI interface,without MCU on board, software and hardware technical support, low price.
Download

Parameters Min. Typ. Max. Unit Condition
Working Condition
Voltage range 2.3 3.3 3.6 V  
Operating Temperature -40 25 85  
Current Consumption
Rx current   12   mA @3.3V
Tx current   12.9   mA @3.3V
Sleep current   20   uA  
RF Parameters
Frequency range 2.4   2.484 GHz  
Tx power -18   + 4 dBm @2.4V
RF rate   1M   bps  

Features

  • 3V battery
  • Based on widely-spread, low-cost 26MHz quartz
  • 1Mbps on-air data rate
  • Programmable RF output level from -18dBm to +3dBm to optimize current consumption for a wide range of applications
  • Supply Voltage Level Detector (SVLD) function enables monitoring the battery charge condition

Applications

  • Wireless Mouse
  • Wireless health sports products
  • commodity information push
  • Remote control
  • Alarm security system
  • Wireless ranging system

 

Beacon128 typical application circuit

 

Beacon128 Pin definition

Pin NO. Pin name Description
1 VCC Connected to the positive power supply (typical 5V)
2 GND Connected to ground
3 TXD TXD of the module and connect to external RXD
4 RXD RXD of the module and connect to external TXD
5 SET Configuration mode enable (low to enter into the setting mode, leave open or connect high level to exit setting mode) Valid when CS Pin is high or leave open.
6 CS Module working Enable(Low level for sleep, current will be less than 40uA, default high level).
7 NC  
8 GND Connected to ground
9 GND Connected to ground

   

Beacon128 Mechanical Size



Special Function Beacon

Contact us

NiceRF Wireless Technology Co., Ltd.
+86-755-23080616
sales@nicerf.com
309-314, 3/F, Bldg A, Hongdu business building, Zone 43, Baoan Dist, Shenzhen, China