LoRa6200Pro 2W small size, wide voltage, serial port lora wireless networking module

LoRa6200Pro is a small-size, wide-voltage wireless communication module. It is developed based on Semtech’s SX127X chip. It adopts advanced LoRa® spread spectrum modulation frequency hopping technology and high-efficiency receiving sensitivity, which makes its penetration ability and communication distance They are far superior to the current general FSK and GFSK products, and have stronger anti-interference.

LoRa6200Pro has built-in overvoltage protection, overvoltage overcurrent, reverse protection and other functions. The wireless module is designed with 2W output power. There are three levels of TTL/RS232/RS485 for choice. The detachable interface design is convenient to use. Industries such as transmission control can be widely used.

In order to cater to the application needs of different customers, we designed this series of module software as an all-in-one optional way. Users can configure the module through PC software to switch between different working modes. In MESH mode, the routing module has automatic routing. Function, users can form a network transmission without blind spots and distance restrictions through the combination of multiple modules. At the same time, users can also encrypt wireless data with AES128 through PC software or serial commands to make data transmission more secure.

Note: The LoRa Pro series can be configured to be compatible with several previous LoRa data transmission modules of our company.

Password ×


 Size: small

 Wide voltage: 9 ~ 30 V

 easy to Install and Fix

 AES128 data encryption

 Mesh network, No blind zone, no distance limit(The open transmission distance of a single module is more than 8Km @low rate)

 Working frequency band: 433/470 MHz optional

 Maximum output power: 2W (+33dBm)

 Overvoltage and overcurrent, reverse protection

 Node/route/node+route optional in MESH mode

 Built-in hardware reset protection circuit

 LORA modulation

 TTL/RS232/RS485 Interface

 Up to 40 communication channels in the same frequency band

 Diversified serial parameter settings

 Sensitivity up to -139 dBm

 LBT (Listen Before Talk)

 Operating temperature range: -40 ~ +85 °C 


 Remote control                             

 Remote meter reading

 Industrial data collection

 Home automation telemetry

 Wireless data communication

 Access control system


Electrical Characteristics

Note: The internal voltage of the module is regulated by 3.3V LDO. CS pin and SET pin control is 3.3V . The serial port TXD and RXD are also 3.3V .

function description

Block Diagram

Pin & Dimension

Pin definition

Mechanical dimensions (unit: mm)