LoRa1280 Series Module Function Demonstration Board

The LoRa1280 function series demo board is used to test the LoRa1280 series of wireless modules for customers to debug programs, test distances, and more. The power supply range of the demo board is: 3V~12V, and the user can modify the parameters of the module by pressing the button.

Password ×
Features&Application

DEMO Board function

■ The SX1280 wireless module ranging demo board mainly implements the RX demonstration function of the SX1280 and the two-way communication in the LoRa mode.


■ The parameters of the two modes in the ranging demo board can be modified.


■ With our sample program, it is convenient to observe the SPI communication between the MCU and the wireless module, and use this development board as a standard signal source without professional RF instruments, debug the customer's development program, and greatly shorten the software engineer's Product development cycle.


Specification

Power supply range: 3V~12V

function description

Operating mode

1. The ranging demo board has two main functions: the ranging demonstration function and the two-way communication in the LoRa mode.


2. Ranging demonstration function After selecting the Ranging Mode ranging mode interface from the main interface, set the ranging mode parameters to be consistent, and then set the master-slave to measure the distance.


3. Communication test function in LoRa mode After selecting the LoRa mode interface from the main interface, set the LoRa mode parameters to be consistent, and then select the LoRa communication interface to test.


Main interface


button Features

There are three buttons on the demo board, which are SET button, UP button and DOWN button; the function is as follows

                  Button

                               Features

     SET button short press

       Determine or enter the next level interface

     SET button long press

        Return to the previous interface

      UP button short press

        Cursor up or parameter plus 1

    DOWN button short press

        Cursor down or parameter minus 1







Pin & Dimension
×