LoRa-CC68 : Demo Board

Function Description of LLCC68 LoRa Module LoRa-CC68

The LCD Full Segment is as below:

The users can set the parameters of the RF module such as frequency /transmitter power/transmission data rate through the buttons.

Working Mode of LLCC68 LoRa Module LoRa-CC68

• Tx normal mode: send data packets regularly (in the setting mode, data packets will not be sent temporarily);
• Rx normal mode: Power on and enter the receiving state, receive data packets, and then send out the correctly received data packets;
• Tx Test Mode: RF module continuously transmit signal;
• Rx Test Mode: RF module is always in Rx mode;
• Standby Mode: RF module is always in standby state.

Button Operation of LLCC68 LoRa Module LoRa-CC68

• [SET] Button

Press the key to enter the setting mode. If the last parameter is set, the key will exit the setting mode.

• UP/Down Button

In setting mode,press to modify the corresponding setting parameters.

Note: The DEMO board has FLASH memory inside, all the setting parameters will behave automatically and keep unchanged even power-off.